16.4kg (36.1lbs) GelCoat Kit… $399.96

Industrial Epoxy Finishing Coating

EcoPoxy GelCoat is an epoxy coating with superior chemical, abrasion, and thermal resistance. It is easily applied with a brush, roller, or sprayed to provide a smooth, non-porous high gloss finish on many surface types such as steel, concrete, composites, eps foam and wood. It is easy to use, wets out well over a variety of surfaces, and will coat vertical surfaces without sagging. It is designed as a finish coat and works well with laminating systems.

Used On:

  • Boats
  • RVs
  • Showers & Tubs
  • Pools

Excellent for In-Mold Coatings. EcoPoxy GelCoat is widely used as an in-mold coating on composite parts to produce a durable part surface. It is a tough and strong surface coat resin that cures at room temperature and offers exceptional abrasion resistance. EcoPoxy Gelcoat is high viscosity and has the ability to be applied thickly on vertical and overhead surfaces in one coat and cures tacky on the surface to bond with laminations. For an impact resistant coating on EPS Foam, two coats are required to build an adequate thickness.

Designed for Long Term Protection. EcoPoxy GelCoat is a premium gel coat formulated to meet rigid requirements of boating, transportation, and containment applications. Applied in a thickness of 16-20 mils, which gives this gel coat depth to survive considerable water sanding, compounding, and re-polishing. EcoPoxy GelCoat provides superior cosmetics and a long term protective life expectancy.

Water Resistant. GelCoat is specially formulated to be water-resistant and highly durable. GelCoat cures hard with a self-leveling finish, even on vertical surfaces. This formula is also resistant to water blistering from frequent use.

Other Features:

  • Easy to spray
  • High gloss retention
  • Produces an exceptionally tenacious etching bond for high adhesion
  • Low odor, No VOC’s, Non Toxic
  • Sag resistant
  • Excellent weatherability
  • 100% solids content for increased build
  • Provides remarkable chemical resistance

GelCoat Product Information

Mix Ration

54:1 by volume

Pot Time

20 minutes depending on ambient temperature

Recommended Spread Rate

16 mil.

Coverage Rate

100 sf/gal.

Cure Time

48 hours @ 70ºF. (21ºC.) @ 50% RH using spread rate of 100 sf/gal.

Set to Touch

6-8 hours depending on ambient temperature, humidity and thickness.

Minimum Recoat Time

6-8 hours

Maximum Recoat Time

24 hours

Cleanup & Thinning

Denatured Alcohol

Storage

55-85ºF. with lid tightly sealed